ML2.5 - MLS Micro Light System power supply module. Power supply module with 4 DC outputs. For powering ML series LEDs. Power supply via ø 2.5 plug (connectable to DC 2.5 sockets). It can therefore be connected to all FRISA control units and extension cords with ø 2.5 plug...

MLE - MLS Expansion Module Micro Light System. 4 DC outputs. For powering ML series LEDs. Includes an expansion socket with 20 cm male/female cables for series connection to the outputs of the mini sockets. MLS is a very useful system for lighting houses and small spaces inside the nativity scene. The MLE product is an expansion module useful for increasing the outputs available for "ML"...

10-bulb battery-operated LED string lights for nativity scenes. Warm white light.

LTA Frisa - Device for managing LED lightning, thunder, and rainbow effects for nativity scenes. For the rainbow effect, connect the PAR12 device, not included. For the lightning effect, connect an LED strip of your choice (cool white recommended) with a 2.5 mm plug, with the desired power rating (up to max. 5W), not included. For the thunder effect synchronized with the lightning,...

SYD12 Frisa - 12V Switched Outlet FADE FADE EXPANSION MODULE 12-volt fade-controlled outlet that can be used with any LED control unit. A power expansion module for LED control units. Very useful in any situation where the power of the fade function in use needs to be increased.

TF5 - Frisa 5A 12V 60W Power Supply Power supply compatible with Frialmaxi and Natalino Parlante LED. Also useful for powering SY12 and SYD12 when the power supply from the control unit they are connected to is not sufficient. Dimensions: 12 x 5.2 x H 3.2 cm

SY12 Socket - 12V ON/OFF Synchronized Socket It is a 12V DC socket that can be synchronized with any phase of LED control units. Synchronization is achieved by connecting its cable to the phase with which synchronization is desired. Required for powering loads that require more current than the DC socket in use can provide.

LBC Frieze Warm white 5 mm LED. FRIAL accessory. With plug and 2 m cable. High brightness; focused light.

Windmill kit with 14 cm blade, including a 3W 10/12 RPM motor with blade coupling and cable with 220-volt plug.

Windmill kit with 9 cm blade, including a 10/12 RPM motor with blade coupling and cable with 220-volt plug.

18 RPM motor / gearmotor - 1.2 W. The shaft protrudes 2 cm and has a 4 mm cross-section.

Motor / Gearmotor 5 rpm - 1.2 W. Diameter: 40 mm Shaft: 4 mm The small shaft protrudes 2 cm and has a 4 mm cross-section.