Frial 2 BASIC - day/night control unit

Frial 2 BASIC - day/night control unit

Day/night control unit designed for lighting medium-sized nativity scenes.
It features 2 fade outputs (day/night) and 2 synchronized outputs (on/off) corresponding to each phase.
It also includes a socket for twinkling stars and a fixed blue socket which can also be used for accessories that you wish to keep switched on throughout the cycle.
The cycle lasts from 48 seconds to 8 minutes 25 seconds.

It is available in three versions:

• Basic: control unit + power supply
• Standard: control unit + power supply + 2 PWM1 multiple sockets for connecting accessories
• Kit:
  Control unit + power supply
  2 PWM1 multiple sockets for connection
  PSBC60 daytime LED strip (60 LEDs)
  PSBL30 blue LED strip (30 LEDs)
  House Lights Kit ML2.5 + MLE + 7 warm white 5 mm LEDs + FIRE LED
  MICROFO 30 fiber-optic stars
  WSBC3 3 warm white LED strip for stable lighting

The lighting included in the kit version is approximately 7 W and is sufficient for nativity scenes measuring approximately 1–1.5 meters.
The maximum total power of the control unit is 24 W. Additional accessories can therefore be added as needed.

OPERATION:
- The DAY / NIGHT outputs alternate with a crossfade to create a night-and-day atmosphere. LED strips of different power ratings and sizes can be connected (for example, PSBC60 warm white for daytime and PSBL30 blue for nighttime).
- MICROFO (30 stars) or MAXIFO (50 stars) star kits can be connected to the STARS output. The stars will fade in and start the twinkling effect when they reach maximum brightness.
- The HOUSE LIGHTS output is an on/off type (therefore without fading) and is useful for connecting house lights, LED spotlights, and, in general, all effects that you want to activate during the night phase. A SYL socket can also be connected to this outlet, which is useful if you have a small 230 V system (for example, a streetlight or house-light system powered by a transformer).
- The ON/OFF output activates during the daytime and is useful for connecting any effects you want to activate in sync with the daytime phase and, also via SYL, moving statues, Motor Control System, etc.
- The 12V DC socket remains on throughout the entire cycle and is intended for a blue strip light (which creates a pleasant realistic effect), a sound player, or accessories you want to keep on for the entire duration of the cycle.