FRISA Micro Light System is a complete lighting system for nativity scenes and dioramas, very easy to manage and particularly suitable for situations where work is carried out in confined spaces or where a minimally invasive lighting system is required.
Power is supplied through a series of power supplies specifically designed to meet the various power needs of nativity scene makers (USB, battery, 2.1 and 2.5 plug). Numerous accessories can be connected to the power supplies; connection is extremely convenient and is made through pre-arranged mini sockets.
The range is also completed by an expansion module which, through male/female mini sockets, allows the power supply outlets to be multiplied, up to the power limit of the power supply to which the first socket is connected.
Each power supply or expansion module can connect 4 accessories. The accessories are equipped with 50 cm long cables with an end connector designed for quick connection to the mini sockets.

MICRO LIGHT SYSTEM:

LED

MLNL NANOLED dia. 2.5 mm, 700 mcd, diffused warm white light
ML3G YELLOW LED dia. 3 mm 500 mcd diffused yellow light
ML3R RED LED dia. 3 mm 500 mcd diffused red light
ML3BI WHITE LED dia. 3 mm 2200 mcd concentrated cool white light
ML5BC WHITE LED dia. 5 mm 15,000 mcd diffused warm white light
ML5BI WHITE LED dia. 5 mm 18,000 mcd concentrated cool white light
ML5G YELLOW LED dia. 5 mm 4,500 mcd concentrated yellow light
MLNLS NANOLED (same as MLNL) (N.B. to connect the MLNLS LED to the wires, you will need a soldering iron or use connectors or terminal blocks, not supplied) supplied with 18 cm outgoing wires; separate from the 50 cm wires and corresponding connector. Compared with code “MLNL,” this version is useful for those who want to insert the nano LED into small holes (e.g., lamp post tubes), taking advantage of the nano LED's very thin, insulated wires (0.4 mm). The wires can then be reconnected to the wires with connector (observing the +/- polarity) and then quickly connected to the mini sockets. This makes it possible to have an entirely LED system rather than a mixed LED/12V filament lamp system.

FLICKERING FIRE LED

FIRE LED FOR 2.5 POWER SUPPLIES
MLF3G YELLOW FIRE LED 3 mm 700 mcd flickering yellow light
MLF3R RED FIRE LED 3 mm 700 mcd flickering red light
MLF5G YELLOW FIRE LED 5 mm 700 mcd flickering yellow light
MLF5R RED FIRE LED 5 mm 700 mcd flickering red light

         
FIRE LED FOR 2.1 POWER SUPPLIES (LED + NANOLED)
NOTE. For technical reasons, “FIRE LED” products intended for use with 2.1 sockets differ from the other versions. They have been fitted with a nanoLED in parallel, which can be used together with the fire LED, positioned elsewhere, or hidden if it is distracting.

MLF3G/2.1 YELLOW FIRE LED 3 mm 700 mcd flickering yellow light + nanoLED
MLF3R/2.1 RED FIRE LED 3 mm 700 mcd flickering red light + nanoLED
MLF5G/2.1 YELLOW FIRE LED 5 mm 700 mcd flickering yellow light + nanoLED
MLF5R/2.1 RED FIRE LED 5 mm 700 mcd flickering red light + nanoLED