Small metal lantern with white light. WE HELP YOU CHOOSE: Dimensions: 1.5 x 1.5 x h 2.5 cm Power supply: 3.5 V Cable length: 40...

CR2032 battery holder - 3V. Its compact size makes it perfect for powering all 3V accessories. WE HELP YOU CHOOSE: Dimensions: 2.5 x 3 x H 0.5 cm Wire length: Approximately 14 cm ON/OFF switch: included Battery not included.

Small copper-colored fountain spout. Perfect for creating small fountains, fountains, or spring-fed fountains in a nativity scene. WE HELP YOU CHOOSE: Dimensions: Length: 5 cm Outlet: Outer diameter: 3 mm Inner diameter: 1.5 mm Inlet: Outer diameter: 5 mm Inner diameter: 1.5 mm

Basin. Water container to simulate pools of water, ponds, stretches of sea, or as a water collection base for recycling with a pump in a nativity scene. Dimensions: 28 x 20 x H 8 cm

Basin. Water container to be used to simulate pools of water, ponds, stretches of sea, or as a water collection base for recycling with a pump in a nativity scene. Dimensions: 44 x 26.5 x H 8.5 cm

Water pump for nativity scene with USB plug. WE HELP YOU CHOOSE: Dimensions: 3.5 x 4 x H 3 cm (feet included - hose connector excluded) Power supply: USB Flow rate: 120 L/h Head (maximum reachable height): 50 cm 5 V - 85 mA Connector: ...

3-attack firing device - 3.5 V per series, very low voltage.

Battery-powered water pump for nativity scenes. WE HELP YOU CHOOSE: Dimensions: 2.5 ø x H 4.5 cm; Battery holder: 8.5 x 5.5 x 2 cm Power supply: Battery (2 AA 1.5 V batteries - not included) Flow rate: 100 L/h Head (maximum reachable height): 25 cm 5...

Water pump for fountain with 3.5V plug. WE HELP YOU CHOOSE: Dimensions: 2.5 ø x H 4.5 cm; Battery holder: 8.5 x 5.5 x 2 cm Power supply: 3.5 V (mini plug) Flow rate: 100 L/h Head (maximum height): 25 cm Tube connector: 6 mm outer...

E10 lamp holder with white bulb + cable and plug Cable length: 45 cm.

Lamp holder + cable + plug + white E5.5 bulb - 3.5 V Cable length: 45 cm. 3.5 Volts

Multiple Power Outlet - DC12FRPW Power outlet equipped with three additional 12V DC sockets. For use with FRIALPOWER and FRILMAXI control units. The device's power plug must be connected to the control unit (to the power supply socket located on the upper side of the control unit). The control unit's external power supply must be connected to the device's "12V" output. The 2.1...